Integrated models of land use and transportation for the autonomous vehicle revolution

ABSTRACT

The advent of the autonomous vehicle (AV) will affect not only the transportation system, but also future patterns of land development. Integrated land use and transportation models will be critical tools in assessing the path forward with this technology. Key questions with respect to land use impacts of AVs arise from potential changes in sensitivity to travel and reduced demand for parking. It is an open question whether AVs will induce urban sprawl, or whether spatial economies of agglomeration will mitigate any reductions in travel time sensitivity. The deployment of shared fleets of AVs would likely reduce parking demand, producing yet to be explored impacts on property development within existing urban footprints. We perform a critical assessment of currently operational models and their ability to represent the adoption of AVs. We identify the representation of time in such models as a vital component requiring additional development to model this new technology. Existing model applications have focused on the discrete addition of new infrastructure or policy at a fixed point in time, whereas AV adoption will occur incrementally through time. Stated adaptation surveys are recommended as tools to quantify preferences and develop relevant model inputs. It is argued that existing models that assume comparatively static equilibrium have been convenient in the past, but are insufficient to model technology adoption. In contrast, dynamic model frameworks lack sufficient structure to maintain reasonability under large perturbations from base conditions. The ongoing advancement of computing has allowed models to move away from being mechanistic aggregate tools, towards behaviourally rich depictions of individual persons and firms. However, much work remains to move from projections of existing conditions into the future, to the evolution of the spatial economy as it evolves through time in response to new technologies and exogenous stresses. Principles from complex and evolutionary systems theory will be important in the development of models with the capacity to consider such dynamics.     

挖掘机动臂自动下降故障的分析与排除

针对小松PC200挖掘机出现的动臂自动下降故障,按照由易到繁的步骤逐步分析了故障发生的原因,并且提出了在故障排除中应注意的问题.     

杭州湾跨海大桥70 m预应力混凝土箱梁用海工耐久混凝土的试验研究

通过平板抗裂试验,研究了海工耐久混凝土的早期抗裂性,采用RCM法研究了海工耐久混凝土抗氯离子渗透的能力。结果表明,使用P.Ⅱ42.5(R)硅酸盐水泥、Ⅱ区中砂、5~25 mm碎石、Ⅰ级或Ⅱ级低钙粉煤灰、粒化高炉矿渣粉及新一代高性能高效减水剂,可以配制出C 50~C 60海工耐久混凝土。     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.     

建构主义学习理论及其倡导的教学模式

本文简要分析了建构主义全新的学习理论以及受其理论影响而形成的教学模式,并结合其基本理论阐述了对大学英语教学的启示。文章认为,教学模式和教学方法的改革离不开现代外语教学理论的指导,建构主义学习理论对传统的教学理论和观念提出了挑战,为大学英语教学模式的转变提供了理论依据。     

基于闭环力反馈原理的非线性液压主动阻尼悬架模型的研究及优化设计

本文在理论上建立了一套基于主动力反馈原理的新型主动阻尼悬架的设计和优化方法。首先提出了该主动阻尼悬架的实现模型，该模型是在传统的液力减振器的基础上，应用半主动控制的思想，结合力反馈的原理建立起来的内部液压反馈阻尼网络模型。理论优化分析和计算机仿真表明，通过该液阻网络模型，即可以实现电控的主动阻尼悬架的功能，它可以根据汽车行驶路况的好坏，自适应地调节悬架阻尼大小以实现主动阻尼悬架的最优控制。     

轻型商用车集成式电子液压制动系统助力策略设计

伴随轻型商用车电动化的发展,用于轻型商用车的线控制动技术得到发展,针对线控制动技术中的集成式电子液压制动系统,提出一种基于模糊PI控制反应盘主副面位移差的制动助力方法。通过实车验证表明:实际反应盘主副面位移差能够快速跟随目标曲线,制动过程平顺,具有实用性。     

深埋双线铁路隧道衬砌高水压分界值研究

为研究深埋双线铁路隧道衬砌高水压分界值以及高水压作用下的衬砌受力状态,基于双线铁路隧道设计标准,利用有限元软件计算和分析双线铁路隧道衬砌在不同水压作用下隧道衬砌安全系数的变化规律,确定双线铁路隧道衬砌的高水压分界值。研究结果表明:Ⅱ、Ⅲ级围岩条件下水压力在0~0.05 MPa(约等于隧道净高一半)和Ⅳ、Ⅴ级围岩条件下水压力在0~0.1 MPa(约等于隧道净高)范围内变化时,隧道断面安全系数基本不变。在Ⅱ、Ⅲ级围岩条件下,双线隧道的高水压第一分界值为0.08~0.20 MPa;高水压第二分界值可取为0.40MPa。在Ⅳ、Ⅴ级围岩条件下,双线隧道的高水压第一分界值为0.12~0.35 MPa;高水压第二分界值为0.50 MPa。双线铁路隧道采用标准设计图进行设计时,能够承受的最大静水头为50 m,超过50 m的静水头,则需要优化断面。     

机电一体化的液压冲击器模糊控制研究

针对机电一体化的液压冲击器的工作特点,将模糊控制策略引入液压冲击器控制系统中,对液压冲击器的输出参数(冲击能与冲击频率)实现了模糊控制,通过实验采集数据表明,系统控制性能良好,实现了新型液压冲击器预期的工作性能要求。     

车辆与工程机械电子液压控制的发展

简要综述了车辆与工程机械中电子液压控制的新进展和需要解决的关键技术问题。提出了实现功率传输和运动控制与综合的新方案，给出了发动机-液压传动装置-负荷最佳匹配的实现方法。以应用于上海磁悬浮高速铁路工程轨道梁运输与搬运的工程机械的计算机控制系统为背景，讨论了基于现场总线控制系统(FCS)和PCI04车载工控机的车辆计算机控制系统的设计方法。